Timing shift alternation
time
According to first start first stop principles to
con - - trol pump rotation,rotation time of 0.25
hours
electromagnetic
switching action delay
When set up a station pump (drive motor) to
switch from variable frequency industry frequ -
ency, or from industry frequency to variable
frequency, and set its electromagnetic switching
action delay time is 0.5 seconds.
To set the determine time 100 seconds from
inverter output frequency reaches the upper
limit frequencies until increase pump (drive
motor); or from inverter output frequency
reaches the lower limit frequencies until
decrease pump (drive motor).
Constant Pressure
Water Supply
Configuration
Decelerating stop: When the inverter failure, the
rotation switching way is from variable
frequency pump to industry frequency and the
pump maintain the status.
N. 1 ~ 4 pumps are frequency controlled pump
Multi-pump control mode, displays the status of
each pump
Multi-pump control mode, set the control mode
of each pump, currently set to Full Stop
5、Constant pressure water supply IO parameter:
Input terminal function select
Input terminal function select
Input terminal function select
Input terminal function select
Input terminal function select
Input terminal function select
Input terminal function select
Input terminal function select
Input terminal function select
Input terminal function select
Timing of water supply time-zero
To Next Page
Loading...
Need help?
General
