Powtran PI8600 Series User Manual

Section III Operation Keyboard
14
Section III
3-2-3. Reset system parameters
Parameter Item
Description
y00 Reset system
parameters
No function
0
Memory area 1 in the keyboard to reset system parameter
1
Memory area 2 in the keyboard to reset system parameter
2
Memory area 3 in the keyboard to reset system parameter
3
Memory area 4 in the keyboard 1to reset system parameter
4
Use the factory setting reset system parameter
5
Example 1: memory area3 in the keyboard 1 to reset system parameter
1. Under monitoring status, press
PRG
into parameter group to query status
2. Through potentiometerSwitch to y00-23 System FG;
3. Press
PRG
,enter into y00-23 System FG parameter group to query status;
4. Through potentiometerSwitch to y01 Upload To Keboard;
5. Press
PRG
, enter into y00 Reset SP parameter modify status;
6. Through potentiometer adjust to 3 ;
7. Finish the adjustment, press
SET
;the speed for download will display on the LED;if cancle the
change, press
ESC
;
8. Press
ESC
to exit to previous menu.
PRG
SET
PRG
PRG
Potentiometer
Two Times
Download
Finished
One Times
One Times
One Times
adjust the value
of parameter
revisement
Potentiometer

Powtran PI8600 Series Specifications

General

Brand	Powtran
Model	PI8600 Series
Category	Inverter
Language	English