Powtran PI8600 Series - Page 17

Section III Operation Keyboard
15
Section III
Example 2 Clear memory area 1, 2, 3, 4 in the keyboard
1. Under monitoring status, press
PRG
into parameter group to check status
2. Through potentiometerSwitch to y00-23 System FG;
3. Press
PRG
, enter into y00-23 System FG parameter group to check status;
4. Through potentiometerSwitch to y01 Upload To Keyboard;
5. Press
PRG
, enter into y01 Upload To Keyboard parameter modify status;
6. Through potentiometer adjust to 5 ;
7. Finish the adjustment, press
SET
;the speed for Clear memory area will display on the LED;if
cancle the change, press
ESC
;
8. Press
ESC
to exit to previous menu.
Two Times
Potentiometer
Clearance
Finished
Potentiometer
PRG
PRG
SET
PRG
One Times
One Times
One Times
adjust the value
of parameter
revisement
Potentiometer