Precor Experience Series User Manual

6. Use a pair of needle nose pliers to remove the retaining cotter pin.
7. Grasp and hold the generator assembly. Then remove the clevis pin and generator
assembly.
Installation Instructions
1. Reinstall the generator assembly onto the drive tower gusset weldment and align the
mounting bolt holes.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 123
6 Replacement Procedures
Generator/Brake Assembly Replacement

Precor Experience Series Specifications

General

Brand	Precor
Model	Experience Series
Category	Fitness Equipment
Language	English