Precor Experience Series - Page 175

7. Reattach the Ramp to the Yoke by completing the Ramp installation procedure, see
"Ramp Assembly Replacement" on page187.
8. Reconnect the Lift Motor input power/control cable.
9. Access the service menu diagnostic CrossRamp Test and operate the ramp incline
level through the full range of motion from minimum to maximum levels and verify oper-
ation:
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 167
6 Replacement Procedures
Lift Motor Replacement