Flash BIOS Update
I. Prerequisites
1 Prepare a bootable media (e.g. USB storage device) which can
boot the system to EFI Shell.
2 Download and save the BIOS file (e.g. B9860PM1.bin) to the
bootable device.
3 Copy AMI flash utility – AfuEfix64.efi (v5.08.02.1189) into a
bootable device.
4 Make sure the target system can first boot to the bootable device.
(1) Connect the bootable USB device.
(2) Turn on the computer and press <ESC> or <DEL> during
boot to enter BIOS Setup.
(3) The system will go into the BIOS setup menu.
(4) Select [Boot] menu.
(5) Set the USB bootable device to be the 1st boot device.
(6) Press F4 to save the configuration and exit the BIOS setup
menu.
To Next Page
Loading...