4.2 Installing Intel
®
Chipset Software Installation Utility
Introduction
The Intel
®
Chipset Software Installation Utility installs the Windows
*.INF files to the target system. These files outline to the operating
system how to configure the Intel chipset components in order to
ensure that the following functions work properly:
• Core PCI and ISAPNP Services
• PCIe Support
• SATA Storage Support
• USB Support
• Identification of Intel
®
Chipset Components in the Device Manager
Intel® Chipset Software Installation Utility
The utility pack is to be installed only for Windows
®
10, and it
should be installed immediately after the OS installation is finished.
Please follow the steps below:
1 Connect the USB DVD-ROM device to BE-0986 and insert the
driver disk.
2 Enter the Main Chip folder where the Chipset driver is located
(depending on your OS platform).
3 Click Setup.exe file for driver installation.
4 Follow the on-screen instructions to install the driver.
5 Once the installation is completed, shut down the system and
restart BE-0986 for the changes to take effects.
To Next Page
Loading...