4.3 Installing VGA Driver Utility
The VGA interface embedded in BE-0986 can support a wide range
of display types. You can have triple displays via LVDS, VGA and
HDMI interfaces and make the system work simultaneously.
To install the VGA driver utility, follow the steps below:
1 Connect the USB DVD-ROM device to BE-0986 and insert the
driver disk.
2 Enter the VGA folder where the driver is located (depending on
your OS platform).
3 Click the Setup.exe file for driver installation.
4 Follow the on-screen instructions to complete the installation.
5 Once the installation is completed, shut down the system and
restart BE-0986 for the changes to take effects.
To Next Page
Loading...