3.4.23 BIOS RESET CONNECTOR
JP9: BIOS Reset Usage Connector
This connector is only for Protech's engineers. (Purpose: BIOS reset). Please do not
use this connector; otherwise, the system might be crashed.
3.4.24 LVDS BACKLIGHT CONTROL SELECTION
Jumper Name: JP7
Description: Jumper for selecting PIN5 (LVDS_BKLTEN) voltage of JINV1.
Note 1: Users can change the setting according to panel specification
Note 2: Please refer to PANEL INVERTER CONNECTOR for more details about
pin definition of JINV1.
To Next Page
Loading...