Enters sub-menu with option to
enabled password protected
HDD/SSD (if supported by SATA
device).
Create an Administrator or User Password
1. Select the Administrator Password / User Password option from the Security menu and
press <Enter>, and the password dialog entry box appears.
2. Enter the password you want to create. A password can be 3-20 alphanumeric characters.
After you have configured the password, press <Enter> to confirm.
3. Type the new password again and press <Enter>.
Change an Administrator or User Password
1. Select the Administrator Password / User Password option from the Security menu and
press <Enter>, and the password dialog entry box appears.
2. Select the Administrator Password or User Password that you want to change. A password
can be 3-20 alphanumeric characters. After you have changed the password, press <Enter>
to confirm.
3. Type the changed password again and press <Enter>.
Remove an Administrator or User Password
1. Select the Administrator Password / User Password option from the Security menu and
press <Enter>, and the password dialog entry box appears.
2. Select the configured Administrator Password or User Password that you want to delete.
Leave the dialog box blank and press <Enter>.
3. Press <Enter> again when the password confirmation box appears.
To Next Page
Loading...