16.3.3 Event messages in the log book
Tab. 22: Events
Log book no. Description
0 Head installation changed
1 Parameter menu called up – dongle was inserted.
2 -
3 -
4 -
5 -
6 -
7 The pump was reset to factory settings.
8 The pump was calibrated.
9
[START/STOP]
was pressed.
10
[Priming]
was pressed.
11 The
[Clickwheel]
was pressed.
12 The pump hose was replaced.
13 The timer performed an action.
14 A relay has triggered.
15 -
16 CRC error has been detected in the EEProm data.
Log book: [hh ll 00 00]
hh – MSB address
ll – LSB address
[00 00 rr ss]
ss – Structure
rr – Result
17 -
18 The metering volume cannot be metered.
19 The pump has been booted and is operational.
20 -
21 The dosing direction was changed.
16.3.4 Log book entry - detailed view
For more information about a log book entry, press the
[Clickwheel]
.
Tab. 23: Information on the detailed view
Line Information
1 Date, time
2 Type of entry (fault, warning ...)
3 Total operating time, total revolutions
Troubleshooting
94
To Next Page
Loading...
Need help?
General
