ProMinent DULCO flex Control - Clear All; Examples

12.4.2.5 Delete individual program lines (
‘Delete’ )
‘Menu / Information è Timer è Set timer è Delete’
1. Use the
[Clickwheel] to select the required program line / instruction
according to its number.
2. The program line will be deleted as soon as you press the
[Clickwheel] .
ð
The timer software re-sorts the remaining programme lines
(Rules - see
Ä ‘Sorting sequence’ on page 67 ).
Delete all program lines
The option to delete all program lines is to be found one
level higher in the menu:
‘Menu / Information è Timer è Clear all’
12.4.3 Clear all
‘Menu / Information è Timer è Clear all è ...’
Use the ‘Clear all’ menu to clear all instructions (the entire program).
12.4.4 Examples
Requirements:
n You have already worked with the pump type
n The time has been set (possible set under
‘Settings è Set time
è Time’ Only possible with ‘Timer status’ - ‘Inactive’ ).
Set up /
‘Menu’
68