Promise Technology Pegasus R4i User Manual

76
Promise Technology Pegasus R4i
Creating a Disk Array Manually
This feature creates a disk array only. You can also use the Wizard to create a disk array with logical
drives and spare drives at the same time.
To create a disk array:
1. From the Dashboard menu, click the Disk Array link.
2. Click the Create Disk Array button.
3. Accept the defaults or make changes:
• Enter an alias in the Alias eld
Maximum of 32 characters; letters, numbers, space between characters, and underscore.
• Enable Media Patrol – Uncheck to disable on this array.
For more information, see “Media Patrol” on page 51.
• Enable PDM – Uncheck to disable on this array.
For more information, see “PDM” on page 57.
Create Disk Array

Promise Technology Pegasus R4i Specifications

General

Brand	Promise Technology
Model	Pegasus R4i
Category	Control Unit
Language	English