Promise Technology Pegasus R4i - Page 88

77
Managing the Pegasus R4iPegasus R4i Product Manual
4. In the Select Physical Drives diagram, click the drives to add them to your array.
The drive modules turn blue when you click them. The physical drives’ ID numbers appear in the
eldbelowthediagram.
5. Whenyouhavenishedyoursettingsandchoices,clicktheSubmitbutton.
The new array appears in the list.
• If you are done creating disk arrays, click the Finish button.
• To create additional disk arrays, click the Create More button.
After you create a disk array, create a logical drive on it. See “Creating a Logical Drive Manually” on
page 98.