Promise Technology Pegasus32 R6 - Page 47

31
Installation and SetupPegasus32 Product Manual
Power modes on the Pegasus32
The Pegasus32 introduces new power saving and response features. These are described below.
The automatic power features are:
• Shutdown –Whenyourcomputershutsdown,thePegasus32unitautomaticallyshutsdown.
• Restart After Shutdown –Whenyourcomputerpowersup,thePegasus32unitautomatically
powers up.
• Spin down HDD - The Pegasus32 includes a power saving feature that spins down the hard disk
drivesifthelogicaldriveisidlefor30minutes.Thiscanbeenabledordisabledandtheidletime
can be changed in the Pegasus Utility. Click on the Controller link in the Dashboard,thenclickthe
Settings button to see how to change this setting.
Shutting down the Pegasus32
The Pegasus32 shuts down automatically if you turn off your computer. If you want to turn off the
Pegasus32withoutshuttingdownyourcomputer,followthestepsbelow.
To shut down the Pegasus32 unit:
1. EjectthePegasus32byright-clickingonthedriveiconandchoosingtheEject option.
2. Launch the Pegasus Utility and click on the Subsystem Information menu button at the top
oftheinterface,unlocktheuserinterface(see“Unlocking the UI” on page 32),clickonthe
Shutdownbutton,thenclickonShutdown in the new menu that appears. You will need to type
“conrm”inthepop-upmenuandclickontheConrm button.
Alternatively,youcanpressandholdthePowerButtonuntilthePowerLEDonthebuttonturns
orange.WhenyoureleasethePowerButton,theLEDgoesdark.