Promise Technology Vess A Series User Manual

Making Controller Settings (CLU)
If your subsystem has two controllers, any settings you make to one controller automatically apply
to the other controller.
To make Controller settings:
1. Main Menu >> Subsystem Management >> Controller Management
2. Highlight the controller you want and press Enter.
3. Highlight Controller Settings and press Enter.
4. Make the following settings as required:
• TypeanaliasintotheAliaseld.
Maximumof48characters.Useletters,numbers,spacebetweenwordsandun-
derscore.Analiasisoptional.
• HighlightCoercionandpressthespacebartotoggle
betweenEnabledandDisabled.
Formoreinformation,see“CapacityCoercion”.
• HighlightCoercion Methodandpressthespacebartotogglethrough:
GB Truncate–Reducesthecapacitytothenearest1GBboundary.
10 GB Truncate –Reducesthecapacitytothenearest10GBboundary.
Grp (group) Rounding –Usesanalgorithmtodeterminetruncation.Resultsinthe
maximumamountofusabledrivecapacity.
Table Rounding –Appliesapredenedtabletodeterminetruncation.
105
Managing with CLUVess A6120 Product Manual

Promise Technology Vess A Series Specifications

General

Brand	Promise Technology
Model	Vess A Series
Category	Network Hardware
Language	English