61
Managing with WebPAM PROeVess A6120 Product Manual
Background Synchronization Rate
1. To change Background Synchronization Rate setting the in Background Activities Settings menu: Click the
Synchronization Rate drop-down menu and choose a rate:
• Low–FewersystemresourcestoSynchronization,
moretodataread/writeoperations.
• Medium–Balancessystemresourcesbetween
Synchronizationanddataread/writeoperations.
• High–MoresystemresourcestoSynchronization,
fewertodataread/writeoperations.
2. Click the Submit button.
LogiCAL driVe initiALizAtion
Technically speaking, Initialization is a foreground activity, as you cannot access a logical drive while it is
initiating.
Initialization is normally done to logical drives after they are created from a disk array. Initialization sets all data
bits in the logical drive to zero. The action is useful because there may be residual data on the logical drives left
behind from earlier congurations. For this reason, Initialization is recommended whenever you create a logical
drive.
Logical Drive Initialization Rate
To change Logical Drive Initialization Rate setting the in Background Activities Settings menu:
1. Click the Logical Drive Initialization Rate drop-down menu and choose a rate:
• Low–FewersystemresourcestoInitialization,moretodataread/writeoperations.
• Medium–Balancessystemresourcesbetween
Initializationanddataread/writeoperations.
• High–MoresystemresourcestoInitialization,fewertodataread/writeoperations.
2. Click the Submit button.