Promise Technology Vess A Series User Manual

Managing SNMP Trap Sinks (CLU)
Viewing a List of Trap Sinks
To create a trap sink:
1. Main Menu >> Additional Info and Management >> Software Management >> SNMP
>> Trap Sinks
A list of the current trap sinks appears.
Adding a Trap Sink
To add a trap sink:
1. Main Menu >> Additional Info and Management >> Software Management >> SNMP
>> Trap Sinks >> Create New Trap Sink >> Trap Sink IP address
2. Press the backspace key to erase the current value, then type the new IP address in this eld.
3. Highlight Trap Filter and press the spacebar to toggle through the severity levels.
See the Table below.
4. Press Control-A to save the Trap Sink.
Event Severity Levels
Level Description
Fatal Non-recoverableerrororfailurehasoccurred.
Critical Actionisneedednowandtheimplicationsoftheconditionareserious.
Major Actionisneedednow.
Minor Actionisneededbuttheconditionisnotaseriousatthistime.
Warning Usercandecidewhetherornotactionisrequired.
Information Informationonly,noactionisrequired.
153
Managing with CLUVess A6120 Product Manual

Promise Technology Vess A Series Specifications

General

Brand	Promise Technology
Model	Vess A Series
Category	Network Hardware
Language	English