Promise Technology Vess A Series - Automatic Configuration

51
Managing with WebPAM PROeVess A6120 Product Manual
AutomAtiC ConFigurAtion
When you choose the Automatic option, the following parameters appear on the screen:
• DiskArrays–Thenumberofphysicaldrivesinthediskarray,theirIDnumbers,congurablecapacity,
andthenumberoflogicaldrivestobecreated
• LogicalDrives–TheIDnumberofthelogicaldrive(s),theirRAIDlevel,capacity,andstripesize
• SpareDrives–Thephysicaldriveslotnumberofthededicatedhotspareassignedtothisdiskarray.A
hotsparedriveiscreatedforallRAIDlevelsexceptRAID0,whenveormoreunconguredphysical
drivesareavailable
Automac Disk Array Conguraon menu
If you accept these parameters, click the Submit button.
The new disk array appears in the Disk Array List on the Information tab.
If you do NOT accept these parameters, use the Express or Advanced option to create your logical drive.