Promise Technology Vess A Series User Manual

172
Vess A6120 Storage Server Appliance Promise Technology
cong
Usage
cong -a auto
cong -a expr [-r y|n] [-c y|n] [-p y|n] [-m y|n] [-s y|n] [-t <AppType>] [-l <NumLd>]
Summary
The cong command has two options: Automatic and Express.
Automatic conguration takes all available uncongured physical drives to create an optimized
disk array following a default set of parameters. There are no options.
Express conguration takes your input, creates one or two arrays, and spreads their capacity
evenly over all of the logical drives that you specify.
The redundancy option creates redundant logical drives (RAID 1, 10, 1E, 5, 50, 6, or 60).
The capacity option enables optimizes the logical drives for capacity. The performance option
optimizes the logical drives for performance.
If you choose all three options, redundancy gets highest priority and capacity gets lowest
priority.
Note that you cannot combine HDDs and SSDs in the same disk array. If your system has both
type of drives, it will create separate disk array/logical drive sets for each type of physical drive.
Options
-a <action> Species the action to perform.
auto Automatic conguration with no options. Creates an optimized disk array. One
or more logical drives are created automatically.
expr Express conguration. RAID level is dependant on the options chosen.
-r <y|n> Selects the redundancy option.

Promise Technology Vess A Series Specifications

General

Brand	Promise Technology
Model	Vess A Series
Category	Network Hardware
Language	English