Promise Technology Vess A Series User Manual

SNMP Settings (CLU)
By default, Simple Network Management Protocol (SNMP) service is set to Automatic and its normal
status is Started.
To make SNMP service settings:
1. Main Menu >> Additional Info and Management >> Software Management >> SNMP
>> Startup Type
2. Press the spacebar to toggle between Automatic and Manual.
3. Highlight the following and press the backspace key to erase the current value, then type the
new value:
• Port Number–161isthedefault
• System Name–(optional)Typeasystemnameinthiseld
• System Location –Typeacountrynameinthiseld
• System Contact –Typetheemailaddressofyoursystemadministratorinthiseld
• Read Community–Typeacommunitynameinthiseld
4. Press Control-A to save your settings.
To start, stop or restart the SNMP service, highlight Start, Stop, or Restart and press Enter.
152
Vess A6120 Storage Server Appliance Promise Technology

Promise Technology Vess A Series Specifications

General

Brand	Promise Technology
Model	Vess A Series
Category	Network Hardware
Language	English