Promise Technology Vess A Series User Manual

Note
If you did not use all of the available capacity of the disk array, you can
create an additional logical drive at this point.
Deleting a Logical Drive (CLU)
To delete a logical drive from a disk array:
1. Main Menu >> Disk Array Management
2. Highlight the disk array that contains the logical drive you want to delete and press Enter.
3. Highlight Logical Drives in the Disk Array and press Enter.
4. Highlight the logical drive you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
5. Highlight Delete Marked Logical Drives and press Enter.
6. Press Y to conrm the deletion.
Press Y again to re-conrm.
Caution
When you delete a logical drive, you delete all the data it contains.
Back up all important data before deleting a logical drive.
135
Managing with CLUVess A6120 Product Manual

Promise Technology Vess A Series Specifications

General

Brand	Promise Technology
Model	Vess A Series
Category	Network Hardware
Language	English