Promise Technology Vess A Series User Manual

86
Vess A6000 Series NVR Server Promise Technology
enClOSure temPerature SenSOr SettingS
The temperature threshold settings are used to send event notices when the internal temperature reaches
a high level. To set enclosure temperature thresholds, click on the enclosure in Tree View, then click on the
Settings tab to view the Enclosure Settings menu. There are two thresholds to congure:
• Controller Warning Temperature Threshold [90-95 C°]—If
theenclosuretemperaturereachesthisthreshold,awarning
messageissentandaneventisrecordedintheeventlog.
• Controller Critical Temperature Threshold [100-105 C°]—Ifthe
enclosuretemperaturereachesthisthreshold,awarningmessage
issent,aneventrecordedisrecordedintheeventlog.
Buzzer SettingS
The audible enclosure alarm buzzer can be enabled or disabled.
To enable or disable the buzzer, click on the enclosure in Tree View, then click on the Buzzer menu expander,
scroll to Settings and click the check Enable Buzzer option box. Click the Submit button.
Enclosure Informaon display

Promise Technology Vess A Series Specifications

General

Brand	Promise Technology
Model	Vess A Series
Category	Network Hardware
Language	English