Commands MP.11-R Installation and Management
Upload
164
Upload
Click Commands > Upload to upload a configuration or log file from the unit to a TFTP server (see TFTP Server Setup
for information about the SolarWinds TFTP server software located on your product installation CD).
Enter the following information:
• Server IP address: Enter the TFTP Server IP address.
• File Name: Enter the name of the file to be uploaded. If you are using the SolarWinds TFTP server software located
on your product installation CD, the default directory for uploading files is C:\TFTP-Root.
• File Type: Choose either Config, Templog, or Eventlog.
Click OK to start the upload.