System Overview MP.11-R Installation and Management
SU Registration
39
SU Registration
The list of parameters you must configure for registration of the SU on a BSU are:
• Network Name
• Base Station System Name (when used; otherwise, leave blank)
•Network Secret
• Encryption (when used)
• Frequency Channel (when available)
See System Parameters to see the description of these fields and to configure them.
NOTES:
• The frequency channel must be the same for the BSU and the SU in order to register the SU when roaming is
not enabled and DFS is not required.
• Channel Bandwidth and Turbo mode (when available) must be the same for the BSU and SU in order to register
the SU.
• Roaming will automatically select a channel on the SU corresponding to the BSU channel. Roaming is the
procedure in which an SU terminates the session with the current BSU and starts the registration procedure with
another BSU when it finds the quality of the other BSU to be better.
To Next Page
Loading...