Procedures MP.11-R Installation and Management
Web Interface Image File Download
171
Web Interface Image File Download
In some cases, it may be necessary to upgrade the embedded software of the unit by downloading an image file. To
download an image file through the Web Interface:
1. Set up the TFTP server as described in TFTP Server Setup.
2. Access the unit as described in Logging in to the Web Interface.
3. Click Commands > Download tab.
4. Fill in the following details:
• Server IP Address: <IP address TFTP server>
• File Name: <image file name>
• File Type: Image
• File Operation: Download
5. Click OK to start the file transfer.
The unit downloads the image file. The TFTP server program should show download activity after a few seconds. When
the download is complete, the unit is ready to start the embedded software upon reboot.
To Next Page
Loading...