Proxim Tsunami MP.11-R User Manual

Procedures MP.11-R Installation and Management
Soft Reset to Factory Default
174
Soft Reset to Factory Default
If necessary, you can reset the unit to the factory default settings. Resetting to default settings means that you must
configure the unit anew.
To reset to factory default settings using the Web Interface:
1. Click Commands > Reset.
2. Click Reset to Factory Default.
The device configuration parameter values are reset to their factory default values.
If you do not have access to the unit, you can use the procedure described in Hard Reset to Factory Default below as an
alternative.

Proxim Tsunami MP.11-R Specifications

General

Brand	Proxim
Model	Tsunami MP.11-R
Category	Wireless Router
Language	English