Basic Management MP.11-R Installation and Management
Monitoring Settings
51
Monitoring Settings
The unit offers various facilities to monitor its operation and interfaces. Only the most significant monitoring categories
are mentioned here.
• Wireless: To monitor the wireless interfaces, click Monitor > Wireless. This tab lets you monitor the general
performance of the radio and the performance of the WORP Base or WORP Satellite interfaces.
• Interfaces: To monitor transmission details, click Monitor > Interfaces. The Interfaces tab provides detailed
information about the MAC-layer performance of the wireless network and Ethernet interfaces.
• Per Station: Click Monitor > Per Station to view Station Statistics. On the SU, the Per Station page shows
statistics of the BSU to which the SU is registered. On the BSU, it shows statistics of all the SU’s connected to the
BSU. The page’s statistics refresh every 4 seconds.
• Click Start Site Survey. It allows you scan all the frequencies that are listed for the configured country code.
To Next Page
Loading...