Page 12 of 110 150821/A4
Safety Symbols
The product is marked with the following safety symbols.
!
Product will be marked with this symbol (ISO#3864) when it is necessary for the user to refer to
the instruction manual in order to prevent injury or equipment damage.
Product marked with this symbol (IEC417) indicates presence of direct current.
Product will be marked with this symbol (ISO#3864) when voltages in excess of 1000V are
present.
Indicates the grounding protect terminal, which is used to prevent electric shock from the
leakage on chassis. The ground terminal must connect to earth before using the product.
Warning Procedure can cause hazard to human if the warning is neglected.
Caution Avoid product misuse. It may cause damage to the product itself and the DUT if the
caution is neglected.
Note Important information or tips for the procedures and applications.
Warning Signal During Testing
“DANGER – HIGH VOLTAGE TEST IN PROGRESS, UNAUTHORIZED PERSONS
KEEP AWAY”
Disposal
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for
information regarding the collection systems available. If
electrical appliances are disposed of in landfills or dumps,
hazardous substances can leak into the groundwater and get into
the food chain, damaging your health and well-being. When
replacing old appliances with new one, the retailer is legally
obligated to take back your old appliances for disposal.
To Next Page
Loading...
Need help?
General