Qualstar Q48 - 6 Packaging the Unit for Transportation

Q24/Q48 Tape Library Installation and Operations Manual
6 Packaging the unit for transportation
WARNING
Weight of Q24/Q48 Tape Library - Risk of personal
injury
Before lifting a library:
 Observe local health and safety requirements and guidelines for
manual material handling.

Obtain adequate assistance to lift and stabilize the library during
packaging.
NOTE
 Before transporting the library, the shipping lock and the yellow
label must be replaced into the slot on the top cover of the
library from its storage slot on the rear panel.
Before packaging the library:
1. Pull out the tab with the product ID label (1)
2. Note the part and serial number (2)
Figure 70 Product ID label
3. Package the appropriate library as shown in Figure 70 or Figure 71.
4. If returning the unit to Qualstar for repair, please call the Technical Support department to
request an RMA number (See: Contacting Qualstar)
Part No: xxx xxx xxx-xx
Serial No: xxxxxxxxxx
WWYY: xxxx
xxxxxxxxxxx
xxxxxxxx
xxxx
© Copyright QUALSTAR 2015 93