Q24/Q48 Tape Library Installation and Operations Manual
3.2.8.3 Releasing and replacing Magazines
This page allows the user to release the right or left magazine from the library.
Figure 53 Release magazines
Select the magazine in the pull down menu and then click the <Release> button.
To release a magazine manually, see Section 4.4. This manual
process should only be used if the magazine cannot be released
using the OCP or the RMU.
3.2.9 Service
3.2.9.1 Performing General library Diagnostics
This page provides the system administrator with general tests to verify the usability and reliability of
the library.
Figure 54 Library diagnostics
Selections available are:
• System Test
• Slot To Slot Test
Select the number of test cycles (No. Cycles) before starting the test. To cancel the test before it
completes, select the <Stop> button.
© Copyright QUALSTAR 2015 56
To Next Page
Loading...
