Q24/Q48 Tape Library Installation and Operations Manual
Figure 45 SNMP configuration
Changes that can be made are:
• SNMP Enabled/Disabled
• IPv4 SNMP Target Addresses
o IPv4 Target 1
o IPv4 Target 2
o IPv4 Target 3
• IPv6 SNMP Target Addresses
o IPv6 Target 1
o IPv6 Target 2
o IPv6 Target 3
• Community name
• Security User Name
• SNMP Trap Notification Filter
o Critical Events
o Critical and Warning Events
o Critical, Warning and Configuration Events
o Critical, Warning Configuration and Information Events
o No Events
© Copyright QUALSTAR 2015 50
To Next Page
Loading...
