Q24/Q48 Tape Library Installation and Operations Manual
4.7.6 Sub error codes related to the media changer
01 Mechanical initialization failure
02 Connection to slave media changer failed
03 Error motor initialization
04 Error during gripper close
05 Error slider home positioning
06 Error elevator home movement
07 Error during sled movement to rotation position
08 Error during rotation initialization, get range failed
09 Error elevator initialization
0A Error during rotation to far position
0B Error first sled initialization, move to sensor failed
0C Error during sled movement to rotation position
0D Error during rotation to drive position
0E Error slider initialization, get range failed
0F Error during slider forward movement
10 Error gripper initialization, get range failed
11 Error during slider home movement
12 Error during rotation to FAR position
13 Error sled initialization, move to sensor failed
14 Error during sled move – check shipping lock
20 Error Inventory scan
21 Error during gripper close
22 Error slider home movement
23 Error during move gripper to scan pos
24 Error reading barcode label
25 Error during move sled to scan position
26 Error during move elevator to scan position
27 Error during sled preposition movement
29 Error during closing gripper
2A Error slider preposition movement
2B Error during opening gripper
2C Error during sled movement up to sensor
2D Error slider preposition backwards movement
30 Error slot preposition
31 Error during sled movement in <FLMoveRotation> function
32 Command sending to media changer failed
33 Error during elevator movement in <FLMoveRotation> function
34 Error during rotation in <FLMoveRotation> function
35 Error during elevator movement in <FLMoveSled> function
36 Error during sled movement in <FLMoveSled> function
37 Error during sled positioning to sensor in <FLMoveSled> function
38 Error during sled positioning to mail slot in <FLMoveSled> function
39 Error during sled positioning without sensor
3A Error during elevator movement without sensor
3B Error slot position sensor not found
40 Movement to/from slot failed
41 Error during first slider movement
42 Error during first gripper movement
© Copyright QUALSTAR 2015 84
To Next Page
Loading...
