Q24/Q48 Tape Library Installation and Operations Manual
4. Operations
• Move media within the library
• Rescanning the media inventory
• Releasing magazines for removal
5. Service
• Performing a general diagnosis of the library
• Determining and updating firmware
• Reboot of the library
• Viewing library logs
• Cleaning tape drive(s)
• Cartridge memory
3.2.3 Login
Some options of the RMU take the library offline. This inactive
mode can interfere with host-based application software,
causing data loss. Make sure the library is idle before
attempting to perform any remote operations that will take the
To login, select the access type and enter the correct password. There are three levels of access:
• Guest - (standard user level – default password std001).
• Admin - (administrator user level – default password adm001).
• Service - (service user level; for access by service personnel only – default password ser001).
Each level affects the areas to which you have access and what actions you can initiate in those areas.
Figure 30 RMU Login
© Copyright QUALSTAR 2015 36
To Next Page
Loading...
