Qualstar Q48 - Q48 Dual Partition Configuration; Q48 Three Partition Configuration; Q48 Four Partition Configuration

Q24/Q48 Tape Library Installation and Operations Manual
3.3.4 Q48 Dual partition configuration
Partition 1
• Tape drive 1: half-height drive (default element address = 256)
• Tape drive 2: half-height drive (default element address = 257)
• Magazines: #1 and #2
Partition 2
• Tape drive 3: half-height drive (default element address = 256)
• Tape drive 4: half-height drive (default element address = 257)
• Magazines: #3 and #4
The mail slot (if configured as MAIL) will be shared between the logical libraries.
3.3.5 Q48 Three partition configuration
Partition 1
• Tape drive 1: half-height drive (default element address = 256)
• Magazines: #1
Partition 2
• Tape drive 2: half-height drive (default element address = 256)
• Magazines: #2
Partition 3
• Tape drive 3: half-height drive (default element address = 256)
• Tape drive 4: half-height drive (default element address = 257)
• Magazines: #3 and #4
The mail slot (if configured as MAIL) will be shared between the logical libraries.
3.3.6 Q48 Four partition configuration
Partition 1
• Tape drive 1: half-height drive (default element address = 256)
• Magazines: #1
Partition 2
• Tape drive 2: half-height drive (default element address = 256)
• Magazines: #2
Partition 3
• Tape drive 3: half-height drive (default element address = 256)
• Magazines: #3
Partition 3
• Tape drive 4: half-height drive (default element address = 256)
• Magazines: #4
© Copyright QUALSTAR 2015 62