Qualstar Q48 - Table 7 Error Codes

Q24/Q48 Tape Library Installation and Operations Manual
Error
Code
Description
User Action
Critical Component Status
F4
Drive Load Timeout
Drive has run in a
timeout while loading a
tape
The sub code indicates
which drive is affected
Retry operation; if not
successful contact
technical support
Drive probably defective.
Drive leader bent.
Drive initialize repeatedly.
Drive defect (no function).
F5
Drive Unload Timeout
Drive has run in a
timeout while
unloading a tape
The sub code indicates
which drive is affected
Retry operation; if not
successful contact
technical support
Drive probably defective.
Drive leader bent.
Drive initialize repeatedly.
Drive defect (no function).
F8
Invalid drive command
Retry operation; if not
successful contact
technical support
Drive probably defective.
F9
Invalid drive parameter
Retry operation; if not
successful contact
technical support
Drive probably defective.
FA
SDCI microcode error
Retry operation; if not
successful contact
technical support
Drive probably defective.
FB
Drive logged out
Retry operation; if not
successful contact
technical support
Drive probably defective.
FC
Internal SCSI command
failed with check
condition
Retry operation; if not
successful contact
technical support
Drive probably defective.
FD
Internal SCSI command
timeout
Retry operation; if not
successful contact
technical support
Drive probably defective.
Table 7 Error codes
© Copyright QUALSTAR 2015 83