EasyManua.ls Logo

Qualstar Q48 - Connecting an Ethernet Cable and a USB Device; Verifying the Host; Powering the Library up or down; Tape Cartridges

Qualstar Q48
111 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Q24/Q48 Tape Library Installation and Operations Manual
2.12.4 Connecting an Ethernet cable and a USB device
To connect the Ethernet cable to the library:
The connection to the Ethernet network is via an industry standard RJ45 copper interface on the rear
panel of the library. The Ethernet connection is used to access the library RMU over a network.
To connect the library to the Ethernet network, insert the Ethernet cable into the Ethernet port of the
library. When the plug is in the correct position, a click should be heard.
To connect the USB device to the library:
The USB port is on the rear of the library. It can be used for firmware upgrades/skin file updates
initiated via the operator control panel (OCP).
2.13 Verifying the host
When the host server is powered on, install the software and/or driver(s) that are compatible with the
library. Backup software packages may require additional software or licensing to communicate with
the library media changer.
To confirm that the host server’s operating system has recognized the library, consult the operating
system documentation.
2.14 Powering the library up or down
Press the power button on the front panel of the Q24 Tape Library to power it up or down. Powering
up can take a few minutes because it includes scanning the inventory and configuration (e.g. how many
and what type of drives are installed)
2.15 Tape cartridges
Before you begin using the library, an understanding of the media type, use, maintenance, and how to
properly label and write-protect your tape cartridges, will help you to prolong the life of your tapes as
well as the library.
2.15.1 Tape cartridge type
The tape cartridge types supported depend on the drive types installed. The library will support any
type of LTO data cartridge and cleaning cartridge that the installed LTO drive will support.
Tape drive generation
Tape cartridge type
LTO5
Ultrium LTO5, 1.5 TB data cartridge
Universal cleaning cartridge, (50 cleans)
LTO6
Ultrium LTO6, 2.5 TB data cartridge
Universal cleaning cartridge, (50 cleans)
Table 2 Tape cartridge type
© Copyright QUALSTAR 2015 20

Table of Contents

Related product manuals