MITX-DNV0 Series - User Guide, Rev. 1.2
www.quanmax.com
// 25
5/ Connector Definitions
The following defined terms are used within this user guide to give more information concerning the pin assignment
and to describe the connector's signals.
Defined Term Description
Pin Shows the pin numbers in the connector
Signal The abbreviated name of the signal at the current pin
The notation "XX#" states that the signal "XX" is active low
Note Special remarks concerning the signal
Designation Type and number of item described
See Chapter Number of the chapter within this user guide containing a detailed description
The abbreviation TBD is used for specifications that are not available yet or which are not sufficiently specified by the
component vendors.
To Next Page
Loading...
Need help?
General
