Quantum DXi V-Series - Space Reclamation

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
Utility CLI Commands 89
The --getstatus option returns the following status for space compaction:
Outputdata:
CompactionStatus=
StatusProgress=0%
StartTime=
EndTime=
Compacted=0.00MB
Stilltocompact=0.00MB
Space Reclamation The following space reclamation commands are available:
• Starting Space Reclamation
• Stopping Space Reclamation
• Displaying the Current Reclamation Status
Starting Space Reclamation
syscli --start reclamation
This CLI command allows the admin user to manually start space reclamation on
the system.
Stopping Space Reclamation
syscli --stop reclamation
This CLI command allows the admin user to stop any current space reclamation
on the system that is running.
Displaying the Current Reclamation Status
syscli --getstatus reclamation
This CLI command allows the user to retrieve the current status for general
space reclamation. An example of the output for --getstatus reclamation is
shown below:
Outputdata:
ReclamationStatus=
StageStatusProgress=100%
TotalProgress=100%
StartTime=TueNov610:55:332012
EndTime=TueNov610:55:392012
DataScanned=0.00MB
NumberofStages=2