104
Menu Reference
GLOB
Parameter
Options Description
Battery Ni-MH,
Alkaline
or Ni-Cd
Loads low battery profile for
each different battery type.
Lo Batt Alert 0-60
seconds
Controls critical battery audible
alert. 0=off.
Battery Info SEL Displays current battery voltage,
DAC value and charge time
remaining if battery is charging.
Charge Time 0-99 Battery charge time in hours.
0=charger off. The battery char-
ger is timer based and charges
at a current rate of 150 mA. The
charger is disabled when BAT-
TERY is set to Alkaline. The de-
fault charge time (99) will charge
9 hours for Ni-Cd batteries and
16 hours for Ni-MH batteries.
Atten Mode Global or
Normal
The attenuator reduces the
amount of signal at the receiver
input. This helps reduce inter-
ference from strong nearby
transmitters. Global attenua-
tor mode applies attenuation
radio-wide, regardless of
individual object settings. In
Normal attenuator mode, the
attenuator follows the individual
object attenuator setting.
Global Atten On or Off When the Atten mode is set to
Global, this controls whether
the Global attenuator is on or
off.
Clear Hits SEL Press SEL to clear all
hit counters.
Hit Counts Yes or No Turns the hit counter feature on
or off.
To Next Page
Loading...
