105
Menu Reference
GLOB
Parameter
Options Description
Dflt ScanList 0-22 Sets default destination Scan
Lists for new objects and
CONV Stor from Searches,
Signal Stalker II, and Tune. Use
1-20 for “normal” Scan Lists
1-20. Use 0 for the “ns” (not
scanned) Scan List (no Scan List
mappings are specified). Use 21
for the FAV Scan List. Use 22 for
the Skywarn Scan List.
Priority On or Off Turns Priority Scan On or
Off. Priority Scan can also be
toggled by pressing FUNC PRI
while scanning.
WxPri On or Off Toggles Weather Priority Mode
on or off. Also accessed by
pressing WX, then PRI.
Scan Lists SEL Enters sub menu for Scan List
settings and status.
SRCH L/Outs SEL Enters sub menu for review,
editing or deletion of search
lockout frequencies.
Clear FAV SEL Press SEL to clear the Favorites
Scan List.
Memory Info SEL Press SEL to see the current
memory usage.
EXPERT BELOW
Tune LED On or Off Activates Signal Strength driven
LED when in Tune mode.
Color 0-7 Red,
Green,
Blue
(RGB)
value
Sets intensity of red, green and
blue LEDs. Press SEL to edit
colors. Press to scroll to R, G
or B LED settings. Use numeric
keys to activate preset intensity
levels for each LED, or use
keys to fine scroll intensity.
Qtxt 1-0 Text
value
Sets QTXT (QuickText) 0-9 text.
Use “$” to indicate end of text.
Key Repeat On or Off Toggles key repeat mode when
a key is held down.
To Next Page
Loading...
