www.raisecom.com User Manual
118
16.3 interface
[Command Format]
interface TYPE
[Function]
Enter interface configuration mode.
[Parameter]
TYPE indicates the protocol style, support e1/fx-eth,
[Default]
N/A
[Command mode]
Remote protocol configuration mode, remote protical e1 or fx-eth interface mode.
[Application Example]
Enter the local interface configuration mode.
RC953-GESTM1(config-RC952FXE1/33)#
interface e1
RC953-GESTM1(config-RC952FXE1/33-e1/1)#
16.4 reset
[Command Format]
reset
[Function]
Reset the remote protocol device.
[Default]
N/A
[Command mode]
Remote protocol congiguration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)#
remote ric 33
RC953-GESTM1(config-RC952FXE1/33)
# reset
Do you reset the device?(Y/N)y
Set successfully.
To Next Page
