Raisecom RC953-GESTM1 - Chapter 9: Management Commands (E1)

www.raisecom.com User Manual
68
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface sdh 1
RC953-GESTM1(config-sdh/1)# loopback remote
Set successfully
8.3 sdh aps-restore-time
[Command Format]
sdh aps-restore-time <1-12>
[Function]
Configure aps-restore-time.
[Parameter]
<1-12>: Time, unite is minute.
[Default]
N/A
[Command mode]
Global configuration mode
[Application Example]
RC953-GESTM1(config)# sdh aps-restore-time 1
Set successfully
8.4 sdh aupje-threshold
[Command Format]
sdh aupje -threshold {positive|negative} <1-65535>
[Function]
Configure the shdh aupje-threshold of adjust pointer.
[Parameter]
{positive|negative}: sdh aupje-threshold .
<1-65535>:
[Default]
65535
[Command mode]
Interface configure mode.
[Application Example]
RC953-GESTM1# config