Raisecom RC953-GESTM1 - Sdh Overhead S1; Sdh Sd-Threshold

www.raisecom.com User Manual
73
[Command mode]
Interface configuration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface sdh 1
RC953-GESTM1(config-sdh/1)# sdh overhead j2 expected RC953-GESTM1 transmit
RC953-GESTM1
sdh overhead expect j2 set success
sdh overhead transmit j2 set success
8.12 sdh overhead s1
[Command Format]
sdh overhead s1 BYTE
[Function]
Set the content of s1 character.
[Parameter]
BYTE: Show the content of this character is hexadecimal.
[Default]
Default is 0x0, quality unclear.
[Command mode]
Interface configuration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface sdh 1
RC953-GESTM1(config-sdh/1)# sdh overhead s1 0xf
Set successfully
8.13 sdh sd-threshold
[Command Format]
sdh sd-threshold {section|line|high-path} <6-8>
[Function]
Set sdh sd-threshold.
[Parameter]
{line|high-path}: set the segment of threshold.
section: regeneration segment.