Raisecom RC953-GESTM1 - Sdh Ses-Threshold

www.raisecom.com User Manual
74
line: multiplex segment.
high-path: higher order path.
<6-8>: value of bit error second.
[Default]
8
[Command mode]
Interface configuration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface sdh 1
RC953-GESTM1(config-sdh/1)# sdh sd-threshold line 6
Set successfully
8.14 sdh ses-threshold
[Command Format]
sdh ses-threshold {section|line|high-path|lower-path} <1-900>
[Function]
Set the SDH threshold value of serious bit error second
[Parameter]
{section|line|high-path|lower-path}: Choose the serious bit error second segment.
section: regeneration segment.
line: multiplex segment.
high-path: higher order path.
lower-path: lower order path
<1-900>: value of serious bit error senond.
[Default]
900
[Command mode]
Interface configuration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface sdh 1
RC953-GESTM1(config-sdh/1)# sdh ses-threshold line 100
Set successfully