Raisecom RC953-GESTM1 - 3.4 User Command

www.raisecom.com User Manual
34
-------------------------------
RC953-GESTM1 admin
raisecom admin
[Relevant Commands]
Command Description
User
Setup user information.
User privilege
Setup the privilege of the specific user.
3.4 user
[Command Format]
user USERNAME password {no-encryption|md5} PA S S WORD
[Function]
Add the users and setup the passwords.
[Parameter]
USERNAME username
password passwords
no-encryption no-encryption proclaimed passwords
md5 MD5 encryption passwords.
PASSWORD password information
[Default]
The Default privilege of this command is ADMINISTRANT, after using user privilege Command to
make the revision.
[Command mode]
Privileged EXEC mode
[Instructions]
The usernames don’t have the capital or not, but the passwords have. The new adding users Default
level is 15, after using Command user USERNAME privilege (administrant|normal|limited) can make
the revision.
There is at least one user whose privilege is ADMINISTRANT in the system database. Only the user
whose privilege is ADMINISTRANT can use this command.
[Command Execute Echo]
Set successfully !
please execute "write" to save!!
Add the user and set the information when the password is correct.
[Application Example]
Add a user whose username is abc and password is 123.