Raisecom RC953-GESTM1 - Sdh Overhead J1; Sdh Overhead J2

www.raisecom.com User Manual
72
RC953-GESTM1(config-sdh/1)#sdh overhead j0 expected RC953-GESTM1 transmit
RC953-GESTM1
sdh overhead expect j0 set successfully
sdh overhead transmit j0 set successfully
8.10 sdh overhead j1
[Command Format]
sdh overhead j1 expected MSG transmit MSG
[Function]
Set the expected received j1 character, transmit j1 character.
[Parameter]
MSG: exp-msg required message
MSG: msg transmitting message
[Default]
Raisecom-Opcom
[Command mode]
Interface configuration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface sdh 1
RC953-GESTM1(config-sdh/1)# sdh overhead j1 expected RC953-GESTM1 transmit
RC953-GESTM1
sdh overhead expect j1 set successfully
sdh overhead transmit j1 set successfully
8.11 sdh overhead j2
[Command Format]
sdh overhead j2 [vc12 <1-63>] expected MSG transmit MSG
[Function]
Set the expected received j2 character, transmit j2 character.
[Parameter]
[vc12 <1-63>]: Choose the switch No. that need to be set.
MSG: exp-msg required j2 message.
MSG: msg transmitting j2 message.
[Default]
Raisecom-Opcom