Raisecom RC953-GESTM1 - 6.3 Show Running-Config Command; Chapter 8: Interface Management Commands (SDH)

www.raisecom.com User Manual
56
N/A
[Command mode]
Privileged EXEC mode
[Instructions]
Indicate if it erases successfully after erasion.
[Command Execute Echo]
Finished erasing!
Information showed when finished erasing the start configuration.
[Application Example]
Erase the device configuration file startup-config.
RC953-GESTM1# erase startup-config
Are you sure[Y/N]:y
Erase successfully
[Relevant Commands]
Command Description
show running-config
Show the current working configuration.
6.3 show running-config
[Origianl mode]
show running-config
[Function]
Show running-config
[Parameter]
N/A
[Default]
N/A
[Command mode]
Privileged EXEC mode
[Application Example]
RC953-GESTM1(config)# show running-config
current running configuration :
snmp-server community private rw
device clock-mode slave
converged-port eth
snmp trap-server 192.168.4.111 162