Raisecom RC953-GESTM1 - 35.6 Reset Command (Remote Device); 35.7 Show Device Command

www.raisecom.com User Manual
179
[Function]
Eth Interface configuration mode of remote interface converter
[Default]
N/A
[Command mode]
Remote protocol configuration mode, remote protocalE1 interface mode.
[Application Example]
RC953-GESTM1(config-RC954FX4E1/1)
# interface fx-eth
RC953-GESTM1(config-RC954FX4E1/1-fxeth/1)#
35.6 reset
[Command Format]
reset
[Function]
Reset the remote protocol device.
[Default]
N/A
[Command mode]
Remote interface converter mode
[Application Example]
RC953-GESTM1
# config
RC953-GESTM1(config)
# remote ric 1
RC953-GESTM1(config-RC954FX4E1/1)
# reset
Do you reset the device?(Y/N)y
Set successfully.
35.7 show device
[Command Format]
show devcie
[Function]
Show the remote protocol device information.
[Default]
N/A
[Command mode]