Raisecom RC953-GESTM1 - Reset-Statistics; Show Interface E1 Occupy Status

www.raisecom.com User Manual
84
N/A
[Command mode]
Interface configuration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface e1 1
RC953-GESTM1(config-e1/1)# remote-e1-loopback
Set successfully
9.11 reset-statistics
[Command Format]
reset-statistics
[Function]
Clear the e1 interface statistics.
[Parameter]
N/A
[Default]
N/A
[Command mode]
Interface configuration mode.
[Application Example]
RC953-GESTM1# config
RC953-GESTM1(config)# interface e1 1
RC953-GESTM1(config-eth/1)# reset-statistics
Set successfully
9.12 show interface e1 occupy status
[Command Format]
show interface e1 occupy status
[Function]
Show the e1 interface occupy status information.
[Parameter]
N/A
[Default]
N/A